Troy Bilt Handle Section Part# 1908639005


$25.00


Troy Bilt Wide Cut Handle Section part# 1908639005 is described as a Handle-Bolt End. It appears that this would be a lower handle section which would be mounted directly to the equipment and another handle section would then be bolted to the top of this handle section. The overall length of this section is approximately 22-1/2". The tubing has an outside diameter of 7/8". The round portion of this tube is bent approximately 5" from the end of the tube. There is a 5/16" hole through the tube at about 1-7/16" from the end. The flat portion of the tube is bent approximately 4-1/2" from the end of the tube. There are two 5/16" holes centered in the flat portion of the tube. One of the holes is 7/16" from the end, and the other hole is located 3-1/2" from the end of the tube. We do not have a list of models that use this part, so please refer to your owners manual for the correct part number for your particular model.
  • Model: Troym0317
  • 4 Units in Stock

Be the first to write a review.  Write a Review.

This product was added to our catalog on Saturday 04 August, 2012.



Have you seen ...

OK Hardware & Rental